Iconi table
The iconic shape of the Iconi table is formed by a bent stainless steel tube and acacia slats that follow the curves of the frame. Although the table appears airy and light, the bent metal structure and wooden slats ensure high strength and durability.
- Stainless steel welded construction, finished with a powder coating in any shade from the RAL colour chart
- Wooden slats with a profile of 73 x 30 mm or 30 x 30 mm - solid acacia, either untreated or with an oil finish in any shade from the wood stain colour chart
Stainless steel finished with a powder coating in a shade of your choice from the RAL colour chart.
Acacia wood, either untreated or with a stain in a shade of your choice from the wood stain chart.
Two anchoring options:
- for permanent installation – an M8 threaded rod screwed into a rivet nut at the base of the bench is fixed directly into a chemical anchor
- chemical anchoring on the surface or below paving - 4 x M8 anchor sets - fixing via a hole at the bench leg – a triangular plate with a hole for an M12 anchor set is attached to the rivet nut using M8 countersunk screws
- chemical anchoring on the surface or below paving - 4 x M12 anchor sets
Technical drawings and 3D modelsTechnical drawings and 3D models can be found below after selecting a variant. To download them, please log in to the can be found below after selecting a variant. To download them, please log in to the
VariantsVariants
Need help? Take a look at our FAQs.
Edit
Most of our products are made from acacia wood, which is highly durable and requires no regular maintenance. The wood can be left untreated and allowed to weather to a natural grey finish.
If you decide to apply a finish to the wood, you will increase its protection against dirt and grease and extend its lifespan. However, you should be prepared for regular, usually annual, maintenance. This is not complicated – simply sand the surface lightly, clean it, and apply a new coat with a brush.
If you want to avoid regular maintenance, we recommend leaving the wood untreated. An unmaintained finish will eventually start to wear unevenly, which can make the wood look unsightly. Conversely, naturally weathered acacia wood retains its characteristic appearance without the need for regular painting.
Yes, all our products can be ordered with installation included. When you place your order, we will also provide you with an estimated installation date.
We recommend planning the preparation of concrete foundations well in advance to ensure proper anchoring of the products and to allow the concrete to cure sufficiently before our installation team arrives. Please prepare the foundations according to the "Installation Drawing", which you can download from our website or obtain from our sales representatives.
Yes, you are more than welcome! We would be delighted to show you around our workshop and showroom. We can also take the opportunity to discuss your current projects over a cup of coffee.
Lo
3D models and technical data for your projects
Log in or create an account to download 3D models and technical data.
Installation diagrams (PDF)