Tubo Bin
The hinged, peak-like canopy is the defining feature of our Tubo bin. Mounted on a single post, it is easy to install in any outdoor space. We offer versions with either acacia slats or steel rods, both of which can be fitted with an optional ashtray and bag dispenser. The lid is, of course, lockable to ensure it can only be opened by maintenance staff.
- Support post made of 80×40 mm steel box section, lid made of bent sheet metal. The body of the metal bin is made of 8 mm diameter steel rods. Steel is hot-dip galvanised and finished with a powder coating in any shade from the RAL colour chart. 40 x 20 mm solid acacia wood slats, either untreated or finished with an oil coating in any shade from our wood stain chart. Inner liner made of galvanised sheet steel.
The steel is hot-dip galvanised on both sides (in accordance with ČSN EN ISO 1461), and the surface is mechanically cleaned before being finished with a powder coating in a shade of your choice from the RAL colour chart.
Inner steel bin is hot-dip galvanised (Z200 NB).
Acacia wood, either untreated or with a stain in a shade of your choice from the wood stain chart.
Via a 150 mm flange for installation below paving
1) concrete footing – 1x M12x330 anchor bolt
2) chemical anchoring – 4x M12 anchor set
Technical drawings and 3D modelsTechnical drawings and 3D models can be found below after selecting a variant. To download them, please log in to the can be found below after selecting a variant. To download them, please log in to the
.png)
Metal or wood
Version with an ashtray
.png)
Version with a bag dispenser
VariantsVariants
Need help? Take a look at our FAQs.
Edit
Most of our products are made from acacia wood, which is highly durable and requires no regular maintenance. The wood can be left untreated and allowed to weather to a natural grey finish.
If you decide to apply a finish to the wood, you will increase its protection against dirt and grease and extend its lifespan. However, you should be prepared for regular, usually annual, maintenance. This is not complicated – simply sand the surface lightly, clean it, and apply a new coat with a brush.
If you want to avoid regular maintenance, we recommend leaving the wood untreated. An unmaintained finish will eventually start to wear unevenly, which can make the wood look unsightly. Conversely, naturally weathered acacia wood retains its characteristic appearance without the need for regular painting.
Yes, all our products can be ordered with installation included. When you place your order, we will also provide you with an estimated installation date.
We recommend planning the preparation of concrete foundations well in advance to ensure proper anchoring of the products and to allow the concrete to cure sufficiently before our installation team arrives. Please prepare the foundations according to the "Installation Drawing", which you can download from our website or obtain from our sales representatives.
Yes, you are more than welcome! We would be delighted to show you around our workshop and showroom. We can also take the opportunity to discuss your current projects over a cup of coffee.
Lo
3D models and technical data for your projects
Log in or create an account to download 3D models and technical data.
Installation diagrams (PDF)