Ponávka lectern panel
The Ponávka lectern panel combines the natural look of oak with a simple, functional design. Its angled information surface makes it ideal for nature trails, outdoor locations, and presenting local points of interest or landmarks. Its understated design allows it to blend naturally into the surrounding environment.
- The main support element is a 100x100 mm oak post with an angled top.
- The upper section features a 2 mm thick galvanised steel sheet panel framed in aluminium. The panel is attached to the post using a 100x100 mm steel box section transition piece and a 4 mm thick steel plate. The panel is covered with a printed film using UV-stable solvent inks and finished with an anti-graffiti laminate.
- The oak post is anchored using a 750 mm long, 80x80/6 mm rolled steel L-profile.
- All fasteners are A2 stainless steel.
The steel is hot-dip galvanised on both sides (in accordance with ČSN EN ISO 1461), and the surface is mechanically cleaned before being finished with a powder coating in a shade of your choice from the RAL colour chart.
The reinforcing frame is made of steel, hot-dip galvanised on both sides (in accordance with ČSN EN ISO 1461).
The aluminium frame is finished with a powder-coated paint in a shade chosen from the RAL colour chart.
Oak wood left untreated or with an impregnation in a shade chosen from the wood stain colour chart.
Anchored by concreting the transition L-profile into the ground.
Technical drawings and 3D modelsTechnical drawings and 3D models can be found below after selecting a variant. To download them, please log in to the can be found below after selecting a variant. To download them, please log in to the
Bespoke sizes
High-quality print with an anti-graffiti finish
Graphics for lectern panels
Need help? Take a look at our FAQs.
Edit
Most of our products are made from acacia wood, which is highly durable and requires no regular maintenance. The wood can be left untreated and allowed to weather to a natural grey finish.
If you decide to apply a finish to the wood, you will increase its protection against dirt and grease and extend its lifespan. However, you should be prepared for regular, usually annual, maintenance. This is not complicated – simply sand the surface lightly, clean it, and apply a new coat with a brush.
If you want to avoid regular maintenance, we recommend leaving the wood untreated. An unmaintained finish will eventually start to wear unevenly, which can make the wood look unsightly. Conversely, naturally weathered acacia wood retains its characteristic appearance without the need for regular painting.
Yes, all our products can be ordered with installation included. When you place your order, we will also provide you with an estimated installation date.
We recommend planning the preparation of concrete foundations well in advance to ensure proper anchoring of the products and to allow the concrete to cure sufficiently before our installation team arrives. Please prepare the foundations according to the "Installation Drawing", which you can download from our website or obtain from our sales representatives.
Yes, you are more than welcome! We would be delighted to show you around our workshop and showroom. We can also take the opportunity to discuss your current projects over a cup of coffee.
Lo
3D models and technical data for your projects
Log in or create an account to download 3D models and technical data.
Installation diagrams (PDF)