Ponávka information board
The Ponávka information board combines the natural look of wood with a simple, functional design. Thanks to its understated appearance, it blends naturally into parks, woodland parks, and other natural settings. It is ideal for displaying tourist maps, nature trails, and information about local points of interest.
- The main support element is a 160x160 mm oak beam. The board is attached via M12 threaded rods to the internal structure of the board. A sandwich panel made of two 1 mm thick galvanised steel sheets, edged with an aluminium frame. Inside the board is a reinforcing support frame made of 25x25/2 mm steel box section. The board is covered with a film printed using UV-stable solvent inks and subsequently laminated with an anti-graffiti film. All fasteners are A2 stainless steel.
Internal frame hot-dip galvanised on both sides.
Aluminium finished with a powder-coated paint in a shade chosen from the RAL colour chart.
Oak wood left untreated or with an impregnation in a shade chosen from the wood stain colour chart.
Concrete installation of extended beams 700 mm below ground level.
Technical drawings and 3D modelsTechnical drawings and 3D models can be found below after selecting a variant. To download them, please log in to the can be found below after selecting a variant. To download them, please log in to the
Need help? Take a look at our FAQs.
Edit
Most of our products are made from acacia wood, which is highly durable and requires no regular maintenance. The wood can be left untreated and allowed to weather to a natural grey finish.
If you decide to apply a finish to the wood, you will increase its protection against dirt and grease and extend its lifespan. However, you should be prepared for regular, usually annual, maintenance. This is not complicated – simply sand the surface lightly, clean it, and apply a new coat with a brush.
If you want to avoid regular maintenance, we recommend leaving the wood untreated. An unmaintained finish will eventually start to wear unevenly, which can make the wood look unsightly. Conversely, naturally weathered acacia wood retains its characteristic appearance without the need for regular painting.
Yes, all our products can be ordered with installation included. When you place your order, we will also provide you with an estimated installation date.
We recommend planning the preparation of concrete foundations well in advance to ensure proper anchoring of the products and to allow the concrete to cure sufficiently before our installation team arrives. Please prepare the foundations according to the "Installation Drawing", which you can download from our website or obtain from our sales representatives.
Yes, you are more than welcome! We would be delighted to show you around our workshop and showroom. We can also take the opportunity to discuss your current projects over a cup of coffee.
Lo
3D models and technical data for your projects
Log in or create an account to download 3D models and technical data.
Installation diagrams (PDF)