Tubo notice board
The Tubo notice board offers a practical space for sharing cultural events, local happenings, and public announcements. It helps centralise poster placement in designated areas, contributing to cleaner public spaces. With its simple design, easily replaceable notice board, and modular connectivity, it provides an economical and versatile solution for towns and municipalities.
- The main support element is a 60/2 mm diameter steel tube. For multiple notice boards in a row, the base of the tube features a flange for anchoring. The notice board consists of a 19 mm thick OSB panel and a steel frame. The side of the frame is made of 50x30/5 mm rolled profiles, and the bottom is made of a bent 50x20/3 mm L-profile. The top of the frame is a weldment of 100/5 mm flat steel and a bent 60x40/3 mm L-profile. All fasteners are A2 stainless steel.
The steel on the posts is hot-dip galvanised on both sides (according to ČSN EN ISO 1461); the surface is mechanically cleaned before painting and finished with a powder coating in a shade chosen from the RAL colour chart or left as hot-dip galvanised only.
The steel on the top collar is hot-dip galvanised on both sides (according to ČSN EN ISO 1461); the surface is mechanically cleaned before painting and finished with a powder coating in a shade chosen from the RAL colour chart.
The steel on the metal frame is hot-dip galvanised on both sides.
The OSB panel is treated with a thin-film wood stain, with its edges specifically protected by several layers to prevent water absorption.
Concrete embedding of extended tubes or anchoring via a flange using 4 x M12 chemical anchors per support.
Technical drawings and 3D modelsTechnical drawings and 3D models can be found below after selecting a variant. To download them, please log in to the can be found below after selecting a variant. To download them, please log in to the
Custom graphics
Adapts to the needs of the space
A low-cost solution
Need help? Take a look at our FAQs.
Edit
Most of our products are made from acacia wood, which is highly durable and requires no regular maintenance. The wood can be left untreated and allowed to weather to a natural grey finish.
If you decide to apply a finish to the wood, you will increase its protection against dirt and grease and extend its lifespan. However, you should be prepared for regular, usually annual, maintenance. This is not complicated – simply sand the surface lightly, clean it, and apply a new coat with a brush.
If you want to avoid regular maintenance, we recommend leaving the wood untreated. An unmaintained finish will eventually start to wear unevenly, which can make the wood look unsightly. Conversely, naturally weathered acacia wood retains its characteristic appearance without the need for regular painting.
Yes, all our products can be ordered with installation included. When you place your order, we will also provide you with an estimated installation date.
We recommend planning the preparation of concrete foundations well in advance to ensure proper anchoring of the products and to allow the concrete to cure sufficiently before our installation team arrives. Please prepare the foundations according to the "Installation Drawing", which you can download from our website or obtain from our sales representatives.
Yes, you are more than welcome! We would be delighted to show you around our workshop and showroom. We can also take the opportunity to discuss your current projects over a cup of coffee.
Lo
3D models and technical data for your projects
Log in or create an account to download 3D models and technical data.
Installation diagrams (PDF)